Worm Gear Speed Reducers " GONG TZYH" รุ่น TK-B จากไต้หวัน
ราคา: 0.00 บาท
รายละเอียด: Worm Gear Speed Reducers " GONG TZYH" รุ่น TK-B จากไต้หวัน
Worm Gear Speed Reducers " GONG TZYH" รุ่น TK-A จากไต้หวัน
Housing; Great rigidity for capable of sustaining severe impacts was obtained by one time casting. Good-looking appearance equipped with cooling fins, which combined with quality lubricating oil, allows good heat dissipation. Material FC20 is used for type 80 and under. Material FC23 is used for type 100 and up.
Bearings; Appling high rigidity ball bearings and tapered roller bearings enable the unit to sustain both horizontal and vertical (lateral and axial) loads to the highest degree.
Worm shaft; The worm shaft is made by one solid piece of carbon alloyed steel. The worm teeth are cut before induction hardening or carbonized to HRC45°or HRC60°. After heat treatment, the worm teeth are ground by state of the art precision CNC grinder to ensure maximum contact with the worm wheel and to increase load-carrying capacity, both in impact and continuous modes.
Worm gear; Worm gears are made by special high strength bronze alloy. The teeth are cut by precision CNC Hobbing Machines. They are designed to sustain high impact
In order to meet the needs of various industrial applications, Gong Ji has developed a series of worm gear reducers that matched international standards.
-With quality raw materials, experienced heat treatment as well as state of the art CNC precision grinding of the teeth of worm shafts, we can ensured smooth and efficient turning as well as long service life. Very quiet and compact. Light weight and elegant appearance. We trust it can contribute a lot to your operations.
; GERMAN KLINGELNBERG CNC Thread Grinding Machine
; GERMAN HURTH CNC Hobbing Machine
; JAPANESE MITSUBISHI CNC Hobbing Machine
; JAPANESE MITSUI Machine Center
; SWISS TRIMOS 2 Dimensional Measuring Instrument
; GERMAN KLINGELNBERG Worm & Worm Gear Meshing Investigator
; SWISS DIAVITE Surface Roughness Investigator
; BRITISH SIGMA Projector
; BRITISH PARKSON Worm & Worm Gear Meshing Instrument
; JAPANESE TOGOSHI Hardness Investigator
The Most Complete Faciliaes In Taiwan's
How to choose
To choose the right "Gong Tzyh" worm gear speed reducers, please check the following parameters:
1. rpm. of the input shaft: when driven with shaft coupling or belt, the maximum rpm may be up to 2000. However, rpm from 600-1800 is recommended.
2. rpm of the output shaft: it can be calculated by the rpm of the input shaft and the speed reduction ratio. rpm of output shaft = rpm of input shaft × speed reduction ratio.
-Special attention should be given when very low speed is required due to lower efficiency and torque. It is also more difficult for the gear to be properly lubricated.
-Please contact the manufacturer to choose the right model as well as the right lubrication oil.
Standard Speed Reduction Ratio of GONG JI
Double reduction (Helical / Worm):
Double reduction (Worm / Worm):