บริษัท รุจิร เอ็นจิเนียริ่ง จำกัด

Booster pump set "Grundfoss"

฿96300.00
Booster pump Set 1.5kw with Pressure tank 300L ราคา 90,000.-+vat7%=96,300.-
เหลือ 10 ชิ้น
ซื้อเลย
หยิบลงตะกร้า
  • หมวดหมู่ : ชุุด 4 Booster pump 40-60 ห้อง ตึก 3-5 ชั้น
  • รหัสสินค้า : 001301

รายละเอียดสินค้า Booster pump set "Grundfoss"

รายละเอียด ชุดปั้มบูสเตอร์  ( TWO PUMPS |- 2 X "Grundfos" Pump Model : CM10-2 Power Supply : 1.5 KW. 3x380V,( DOL. beginning ) Pressure diaphragm Tank Capacity 300 litres. Booster pump controller, Two pumps Operation ( aấu | lasu ) Manual control  โดยสวิตช์ปุ่มกด START / STOP Alternate / Parallel by Controller B200 ( PC Controller ) ควบคุมอัตโนมัติโดย Pressure switch : 2 set Low level Cut-off by Electrode B-200 : 3 ระดับ WIP W-OP4 รีเลย์ป้องกันเฟส 380 V กล่องควบคุม Outdoor  type |- Accessories for Booster pump piping And Assembly package set viagauun lii Valve x viaas 1.1/2" / Header av 2.1/2" laisouansõadu / Naisnunnsınašuszuu / šadowš

CM10-2 A-R-A-E-AVBE

Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. The mechanical shaft seal is a special designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).

The pump is fitted with a 3-phase, foot-mounted, fan-cooled asynchronous motor.

Specifications

Liquid:
Pumped liquid:  Water
Liquid temperature range:  -20 .. 90 °C
Liquid temperature during operation:  20 °C
Density:  998.2 kg/m³

Technical:
Speed for pump data:  2900 rpm
Rated flow:  10 m³/h
Rated head:  27.1 m
Primary shaft seal:  AVBE
Approvals on nameplate:  CE,WRAS,ACS,TR,EAC
Curve tolerance:  ISO9906:2012 3B

Materials:
Pump housing:  Cast iron
   EN-JL1030
   ASTM 30 B
Impeller:  Stainless steel
   DIN W.-Nr. 1.4301
   AISI 304
Rubber:  EPDM

Installation:
Maximum ambient temperature:  55 °C
Maximum operating pressure:  10 bar
Max pressure at stated temp:  6 bar / 90 °C
   10 bar / 40 °C
Flange standard:  WHITWORTH THREAD RP
Pump inlet:  Rp 1 1/2
Pump outlet:  Rp 1 1/2

Electrical data:
Motor type:  80C
IE Efficiency class:  IE2
Rated power - P2:  1.2 kW
Mains frequency:  50 Hz
Rated voltage:  3 x 220-240D/380-415Y V
Service factor:  1
Rated current:  4,8-5,2/2,8-3 A
Starting current:  770-800 %
Rated speed:  2820-2860 rpm
Motor efficiency at full load:  79.6 %
Enclosure class (IEC 34-5):  IP55
Insulation class (IEC 85):  F

Others:
Minimum efficiency index, MEI ≥:  0,7
Net weight:  25 kg
Gross weight:  27.5 kg